Homemade Adjustable Pinion Snubber

I don't have a picture, but what I did was remove the original bumper off of the pinion snubber. I then took two pieces of square tubing, one the same size as the bumper and another a little bigger to accept the first. I cut them at I "think" 3 inches and slid one inside the other. From there I drilled three holes through both at once. I welded the larger to the original pinion plate. Then I attached the bumper to the inside piece.

Went to the hardware store and bought a pin with a wire clip, adjusted it where I wanted it and put the pin in. Seems to work well. For about 2 bucks and a half hour work I have an adjustable snubber.