Making old nuts, bolts and clips new again

I sandblast, then use a wire wheel on em. Makes em look super shiny, almost chrome. Undercarriage bolts i sandblast, put a thin coat of primer and black paint. On the ones i wire wheel, i spray them with a small amount of zipchem corban 27 corrosion resistant coating. It gets hard like an enamel spray coating, but a little thicker. Too much it gets a pinkish tone to it, but is transparent. Check out lower end of my steering column in my pictures. All those screws and pieces were sandblasted, wire wheeled, and sprayed with corban 27