62 valiant /6 turbo build

Here's a quick update for everyone still following this build.
Here's some of the run down on what was done this winter
1. New fuel pump aeromotive A1000
2. 10 an feed and return fuel lines
3. Holley 390hp modified by Eric at Horsepower Inovation that was flow tested at 530 cfm with 8an feed from the Mallory 4309 reg
4. 8gal aluminum fuel cell
5.New lean burn dizzy
6. I built a megasquirt 2 3.0 to handle all my ignition control and launch control, data logging, boost control, I've tested it but still need to install the unit.

Yesterday I dropped the new dizzy in and without even messing with the timing the toad fired right up I didn't have much time to do any kind of tuning or even set the timing but ill say one thing the TOAD sure seams to like the corn the car sounds crisper and there is a distinct cleaner smell.
I probably won't have much time today to get anything done but in the next couple days I'm hoping to start with some boost tests ill keep everyone posted and you will get some video
Stay tuned