Craziest/Stupidest/Most Intersting Way You've Moved An Engine?

The one I remember the most was that I didn't move the engine, I moved the trucks.
I was too young and din't have an engine hoist, so I jacked up the front of the truck and put wood block under the motor then unbolted everything drop the front of the truck back down.
Then with the motor up off the mounts and everything disconnected I had to remove the whole front end and hood so I could could push the truck back and then do the whole thing on another truck to push it up under the motor that was on the blocks to bolt her all back in there then drop it down and finish it up.

13 years old, no hoist, no local friends that could help me (Not even to push the trucks around and get them lined up with the motors propped up on blocks in the yard.)
When I needed to move one I would get a 2x4 and start prying behind the tires and adjusting the steering wheel as I went to get them into place.

2 days later I had a running 1946 Ford pickup with a flathead V8.

True story

I had zero help but shitloads of time when I was young. :-)