Craziest/Stupidest/Most Intersting Way You've Moved An Engine?

Used to work at a motor shop. Every motor that we loaded for delivery was done by hand, bolts in the bellhousing area and anyplace on the front. Gloves/rags and heave ho. Now I use a tractor to lift heavy things......and for parking the trailers. Much easier to wiggle them into there spots then using a truck. Use a tarp for dragging tree trimmings down off the hill to load on a trailer. Once used a hand truck to install a motor/trans from the bottom. Having a bad back means getting creative when it comes to lifting. When digging the holes, by hand for our fence post we encountered more than one rather large rock. Aint no way any one is going to manually lift a 500 pound rock from a hole. Couple of ratchet tie downs wrapped around and the tractor solved the problem. Would be lost without the little tractor.