Project Frog Princess
Thanks. Another member just purchased those. Just not sure about the shop's reputation. Have you used them?
I have not YET my 99 Durango 5.9 needs a top end rebuild (220k on the truck) and instead of $600 into having the stock heads redone I'm going buy these for $700... this summer it will happen
And they're NEW castings, good valves (SS 2.02/1.625), really nice valve springs, and they have a couple versions of them with standard intake mounting pattern and the magnum pattern.. plus porting and valve spring options
FAR better than stock magnum heads that are known for cracking.. Plus my truck has low compression in cyl. 5 which is also common from what I have read on dakotart.com
So the top end will come off and inspect the cylinders and if it needs a short block it will get rebuilt- other wise put the top end on it with a few improvements "while I'm in there" and break that in and rebuild the trans to support a T70 turbo and 10psi.. then it will get a single turbo mounted behind the passenger side fog light opening
Sorry kinda a off topic reply but oh well
If you want to learn about magnum motors head over there.. there are guys in the 10's with EFI Magnums
