Breathing new life into the 318 in the Scamp!

So, I HAD the springs for this cam.

I sent them with the retainers to the machinist who did one of my 360's. I was returned a set of 318 heads with 360 valves and no springs. I thought he gave my springs back with the box and retainers...

Turns out, I donated a $440 set of J heads that had hardened seats, a 3 angle valve job with stainless valves and new guides... AND a $95 set of Hughes springs to a sledge hammered scrap iron roll off dumpster, after he went out of business.

So, I'm going to try this again, once I have all of the parts, next weekend! 3rd time's a charm!