Weight comparo: HDK vs Stock

Thanks Dr H., I will look forward to it.

Here is the list of needed components you can buy direct from your favorite jobber
(Jegs, Summit, Speedway Motors, ect)

Quantity:

1 ) #555-60781 manual Mustang II rack and pinion......Jegs $129.99ea
2 ) #910-34341 rack and pinion bushings...............Speedway $8.99ea
4 ) #555-64210 1/2"id x 1/4" alum rod end spacers......Jegs $2.49ea
8 ) #910-08051 stainlees steel poly end...............Speedway $14.99ea
8 ) #910-01156 stainless steel 5/8 RH jam nut........Speedway $2.99ea
1 ) #910-34304 2" drop mustang II spindles.........Speedway $169.99pr
1 ) #3910-615074 nuts/washers/cotter for spindles..Speedway $6.99set
4 ) #40-3202 Moog 772 screw in ball joint............UB Machine $21.20ea
1 ) G-tech MII tie rod ends (1pair)..........Fat Man Fabrications $46.00pr
1 ) Alden Eagle coilovers .................................Alden Eagle $388.95pr
1 ) 11/16" x 2" bump stop(pair)..............................Jegs 8.99pr
1 ) 2 1/8" x 2" bump stop(pair).............................Jegs 8.99pr

Sub Total...........................$1016.88


Optional: additional rear crossbar where drag link would normally be
(Note: some oil pans will not allow)

1 ) #910-34258-20 5/8' steel swedge sleeve...........Speedway $12.99ea
1 ) #910-01156 RH stainless steel jam nut................Speedway $2.99ea
1 ) #910-01056 LH stainless steel jam nut................Speedway $2.99ea

Add..................$8.97

Other Options:

Addco sway bar made for the HDK (dropped shipped included)
7/8" , 1", or 1 1/8".....................................................add $150.00ea

Substitute:

Wilwood Pro spindle..............................................Wilwood $349.00pr
Power Thunderbird (re-built) rack and pinion...........Speedway $199.99ea
1" extended ball joints w/tool.......................................QA1 $100.00pr