wheel bearing stuck need help...

d5667 said
Take a sharp chisel break a piece of the race so that you can take the rollers out. Then slide the drum off.

Rocky_JS said
you could also try to break a piece off of the inner flange with a good punch and hammer then fish out some bearing rollers it will come off then. then you can work on separating it from the spindle.

Most likely the bearing race is now welded to the spindle, at least partially.

You "might" get it off with a proper hub puller, but good luck finding one, unless you can fabricate one. You need the type used for tapered rear axles, like old Fords, IHC Scouts, pickups, Jeeps, AMC and Mopars up through 64