Painless wire harness install (MORE PROGRESS)
well this weekend i installed my new electronic speedo. and the sending unit on the transmission. it was a very simple install and seems to be working very smoothly. I still have to get it out on the road and get it calibrated but during the little test i did it works great and is very smooth. here is a little video of it in action.
[ame=http://i370.photobucket.com/albums/oo147/johnnydart_photo/DSCN0376_zps60416dee.mp4]
[/ame]
I have all the wiring done now from the dash back. I just need to wire the headlights and front park/turn signal lights. I am in the process of running a conduit from the firewall to the core support on the inside of the driver side fender. here are some progress pictures.
the flange at the firewall side has a stud the bolts it to the firewall.
I had to cut and weld the conduit to go around the shock tower. I thought about drilling the mount out and going thru it but i didnt want to mess with a structural piece.
got it in primer now and will be painting it with the same under coating as the inner fender and then bolt it back in. should blend in nicely.
well this weekend i installed my new electronic speedo. and the sending unit on the transmission. it was a very simple install and seems to be working very smoothly. I still have to get it out on the road and get it calibrated but during the little test i did it works great and is very smooth. here is a little video of it in action.
[ame=http://i370.photobucket.com/albums/oo147/johnnydart_photo/DSCN0376_zps60416dee.mp4]
[/ame]I have all the wiring done now from the dash back. I just need to wire the headlights and front park/turn signal lights. I am in the process of running a conduit from the firewall to the core support on the inside of the driver side fender. here are some progress pictures.
the flange at the firewall side has a stud the bolts it to the firewall.
I had to cut and weld the conduit to go around the shock tower. I thought about drilling the mount out and going thru it but i didnt want to mess with a structural piece.
got it in primer now and will be painting it with the same under coating as the inner fender and then bolt it back in. should blend in nicely.
