Spray can and clear coat question

Try to get epoxy type or urethane type paint and clear if you are going spray bomb.

Most that spray bomb is half *** at best and you can expect immediate or near future problems.

If you are doing black gloss, the appliance epoxy enamel is quite nice for a spray can. It is single stage and finishes with a great hard gloss. I used it on a set of brake drums and it held for 5 years and they werent even sand blasted, just cleaned with MEK and a wire brush wheel. Appliance spray cans have other colors but it is more appliance colors.

You really need to get a little used air compressor and a cheap gravity feed gun from Eastwoods. Then find a local auto paint store folks and buy small amounts of the color you want. You can get great results with acrylic urethane single stage if you prep the object properly.

TCP Global is an excellent web source for tons of paint, clear and accessories with great pricing.

Also
http://www.smartshoppersinc.com

has lots of auto paint / body stuff.