alignment woes ..offset bushings

Just like that little dog ..here wego..i had a dr app tues drove to berkley to look at a van on wed then to the local bait shop and booked a fishing trip for thurs and today..PULLED OUT THE CAR...started to align that beast and man was it easy..just like you all said..followed the insructions as best i could..had trouble jacking at the lower ball joint.so i supported it at the front of the hub with jackstands in two spots in case it slipped.left one side on wheels and worked on the other side moved front forward ball joint moved .pulled rear back and it moved back some more..put a precision level on it and moved the rear forward till it was perpindicular straight up and down and tightened all bolts..had a much more difficult time adjusting toe in.. not easy..very little adjustment moves front and rear dimension not just the rear.. got it but doing it myself while trying to hold and support the tape was a chore..finally put some two by fours to support the middle of the tape while measuring.. it has not driven this good ..i just went around the block havnt had a chance to go driving but i will..wander is gone massive corrections are or seem to be gone..i think i can lay my elbow on the door and drive with one hand..THANK YOU ALL....THANK YOU ALL...J