Alignment Problems

chargerjoe68 said

Ok so what is my best way to get this caster? Just work the upper ball back by moving the camber bolts or buy the offset bushings?

Click to expand...

Buy the offset bushings, here's how to install them: set the arrows to point paralleled to straightest point on the body of the UCA, the correct direction of course, make this tool, lube em' up and stuff em in!:

http://www.forabodiesonly.com/mopar/showpost.php?p=1666568&postcount=22

Here is an article that goes into depth on how old Mopar suspensions are inadequate for today's road and driving habits.

http://www.allpar.com/history/mopar/front-end-alignment.html