Almost have the drum brakes done but have a question.

Just when I think I got it :)

Kim,

ur missing the tab that holds the brakes to the stud on the top center

Do you have a picture of this ? I have a stud left from my adjuster kit...is there a pic of how it installs ?

Then ur cable then ur springs, rear spring on 1st then front spring........

OK, got that. Order is important.

Strut bar and anti rattle spring are not right but still may work, but appears to be holding the shoes away from the top stud

Buddy then sold me the wrong parts. I didn't know really what they should look like. Will have to get that resolved pronto.

is ur adjuster left hand thread on the drivers side, it should be

Does that mean it expands when rotated clockwise (when facing the front of the car) it expands ?

Okla,

It also looks like you are missing the bottom pin lock on the shoe hold down pins on both sides. The spring is supposed to be sandwiched. It should be pin lock, spring and pin lock.

Could you circle that in one of the pics.

This is considered a 10 inch brake, correct ?

Thanks
ian.