My 70 Dart

Ok, some pictures of where I'm at right now. A little setback on passenger door. Seems that I didn't scuff the door enough between the black primer(rattle can) and a blue. As a result after spraying a surfacer down I noticed there were issues with adhesion. Turns out the paint and all from the black primer up there were no adhesion. I could take a putty knife and very very easily scrape everything off in one nice long continual piece. After I stopped kicking myself in the pants over a dumb mistake I went back at it. I also checked the adhesion in a few other places. If I had to grunt and put all my weight into it to get it to come off, I think adhesion won't be an issue. And I weigh quite a bit more than 160 lbs! LOL. So lesson I need to remember. "If past the recoat window you MUST scuff coating well before applying anything on top of it." A rookie mistake that I should not have done. What happens when you get in a hurry. There are a few pictures.