**73 Scamp Mini Pro-Street Engine Swap**

This is the next mod while I wait on parts....... Going to work on the Shifter Gate.
Goal since the new valve body is Manual Reverse Pattern, PRN123...... I will do the modification so I put it in 1st and bring it up on the converter then when it hits the shift point I will be able to POP it into second straight down without going into 3rd.... then same in 3rd just pull in a hair and down. This should be very easy to do, grind on one spot and put it back together! All gauges, switches etc will be down low and out of the way. I will have a Full Throttle switch on the carb for the NOS and a button I will try to incorporate into the shift lever or steering wheel.... Most likely same button will control the Purge as the NOS along with the Line Lock and be controlled with Toggle switches and LED's so I know what is on. We will see.

Sleeper....................

View attachment Screen Shot 2013-04-25 at 3.00.56 PM.jpg

View attachment Screen Shot 2013-04-25 at 4.00.03 PM.jpg