Where to buy steering wheel wire harness

Kevin,

I have used junkyard connectors with no problem. The plastic is still excellent. Not much heat in the cabin, especially down low. Do not cut and butt-crimp the wires unless you want guys like me ridiculing you. No special tool is required to release the pins, just a small screwdriver. I forgot exactly how I did it (from front or rear?) but it is real simple.

Those connectors were used only until ~1971 in A's, or whenever they put the key in the column. However, I found them in 80's Dodge motorhomes, so look thru the van section at the junkyard.