Show me your small block!

•SHORT BLOCK: ‘69 340 block, now .030 over to make 416 CID. Scat 4" cast crank kit from Brian @Indio Motor and Machine.
•BLOCK MODS: Oil passages smoothed and ported to reduce turbulence/cavitation and help flow. Valley and all up facing surfaces smoothed and cleaned up to help oil drain-back. Water jackets/passages meticulously picked clean of rust and slag for good cooling.
•OIL PUMP: Melling high volume. Passages smoothed and port matched to rear main cap.
•HEADS: Edlebrock. Ported, intake and exhaust port matched, combustion chambers matched to block,
•VALVE COVERS: Old Cal Custom finned ($40 swap meet) with steel core MP gaskets for good no leak and removable seal
•CAM: Comp 274S soild. .502/.511, 236/242 @.050
•ROCKERS: Comp Pro Magnum steel rollers.
•PUSH RODS: Smith Bros custom spec'd to assembled valvetrain with push rod measuring tools.
•INTAKE: Mopar M1 Single plane, changed to squared carb flange with Moroso epoxy, cleaned up plenum, port matched.
•CARB: Demon Silver Claw 750 cfm advertised. Firesleeve on pump to carb 3/8" fuel lines.
•FUEL LINE: 3/8" sender and 3/8" body fuel line. Firesleeve near headers.
•IGNITION: MSD E-Curve distributor, MSD Baster II, 8.5mm Crane wires
•OIL PAN: Milodon Road Race/Pro Touring pan developed by Milodon from this project!
•Windage Tray: Milodon with Milodon main stud kit. Clearance adjusted to stroker crank.
•BOLTS AND STUDS: Milodon Made in USA all in house. Heads, Mains, Oil Pan

COOLING SYSTEM:
•WATER PUMP: Milodon aluminum with anti cavitation plate
•RADIATOR: Champion 4 core
•T-STAT: Milodon brass 160 degree
•FAN CLUTCH: Hayden #2765 (short 3 5/16" mounting)
•FAN : MP shortened
•FAN SHROUD : Custom hand made aluminum foam sealed against radiator.
•CLAMPS: ABA brand clamp. Completely smooth ID and rolled edges so not to cut hose.
•FLUID: Distilled water, 2 bottles Justice Brothers Radiator Cooling System Protectant with water pump lubricant, 1 bottle Justice Brother Super Radiator Cooler

EXHAUST
•HEADERS: TTI for ground clearance. Port matched then ceramic coated outside, thremal barrier coating inside. Best quality.
•EXHAUST: TTI X-pipe with Super Turbos 2 1/2"