Looking for 66 dart radio plate
How would you refinishing something like this?
see above pictures in my post they were cleaned with the Original yellow cap easy off oven cleaner. no sanding involved just spray (cover with paper towel) wait for a while and scrub off, may take a couple of coats to even get rid of the crumbly chrome. then spray chrome and detail plus it leaves the part with a nice shint smooth surface for spray chroming. here's some that were cleaned and sprayed.
before cleaning with easy off oven cleaner
View attachment DSCF3755.jpg
after spraying oven cleaner a couple of times and wiping off
View attachment DSCF3766.jpg
cleared spray chrome.
View attachment WP_20130507_007.jpg
datailed out a bit (darn tape flopped onto the black paint and now I have to re-shoot the black on the end piece!
View attachment WP_20130522_009.jpg
speedo bezel done and waiting for me to polish the lens
View attachment WP_20130522_005.jpg
glove box for GT with lock in door
View attachment WP_20130522_004.jpg
total price was
200.00 spray chrome (if I see flaws or it peels he'll reshoot the chrome) the radio bezel didn't come out good when I taped it and he's reshooting that after i strip it back down. (with him using 2k paint for the base and clear easy off is struggling but it's working (slowly with many coats) to remove the stuff.
7.00 1 can of argent silver (really the wrong color but I liked it!)
5.95 1 can of satin black from krylon. matched the plastic glove box locking piece really close.
so for 213.00 plus 2 bucks tax on the 12.95 for paint and time I have a nice set of bezels.
