[SOLD] Slant 6 "Super 6" 2BBL Intake Manifold, Carburetor, Kickdown Linkage.

-
Status
Not open for further replies.
hemi71x

hemi71x

FABO Gold Member
FABO Gold Member
Joined
Dec 22, 2009
Messages
7,649
Reaction score
4,875
Location
Rancho Cordova, CA
Rating - 100%
73   0   1
Contact seller
Selling this "Super 6" Intake manifold, Carter #8262S BBD 2bbl carburetor, and all the proper kickdown linkage, brackets, to make it work.
Most of all the nuts and bolts, washers, are there also, that didn't break off during the removal of the intake, from the engine.
Don't have a carburetor return spring, or the spring for the kickdown linkage rod, so you use what you have.

I don't know if you need anything else to do the conversion from one bbl, to two bbl.
You do your own research on the internet to do the conversion.
I am selling all the parts that i have, that you see in all the pictures.

Selling everything at $250.00 + what it will cost me to package everything up in a couple of boxes, + the FEDEX'ing to your zip code, with insurance, and signature delivery fees to your city and state. + the 3% Pay Pal Fees.

Selling to the 1st person that pays for the items, and deposits payment into my Pay Pal account.

Contact me through this forum, with a PM message, and we can go from there.
Thank's
Jim V.
 

Attachments

  • SUPER 6 Set Up 001 (Small).JPG
    119.5 KB · Views: 986
  • SUPER 6 Set Up 002 (Small).JPG
    113.6 KB · Views: 777
  • SUPER 6 Set Up 003 (Small).JPG
    137.5 KB · Views: 732
  • SUPER 6 Set Up 004 (Small).JPG
    120 KB · Views: 566
  • SUPER 6 Set Up 005 (Small).JPG
    89.4 KB · Views: 579
  • SUPER 6 Set Up 006 (Small).JPG
    121.3 KB · Views: 543
I did the conversion but swapped the complete motor and what a difference... this set up looks very clean. you'll still need to open up the exhaust with a 2.25 pipe all the way back and change the points to electronic but anyone does this with the old /six you'll enjoy it
 
If you still have the parts vehicle you pulled this off, you may want to grab the electric choke, the choke heater module, and the air cleaner. All are specific to the Super Six, although a 318 air cleaner will work too.
 
Nice deal, Jim. Here's you a little more time at the TOP.
 
6-5-2013
Update on the parts to this Super 6 set up.

I now have the choke, and the shorter accelerator pedal cable, for this set up, after reading the tech article, that another member posted, to this thread.
Thank's a lot for that link. Good reading.

The wrecking yard that i got the intake at is 130 miles out from me, but i was only 15 miles away from it this Sunday, so i went back and got the rest of the parts off the donor car, when i found out other parts would be required for this set up.

I listed all these parts over on eBay also, when everyone was dragging their feet on buying these parts from me.
I wanted to list it here, at a cheaper price, and give people here a first shot at the parts.

I got a bidder for the set up within an hour and a half, of listing it on eBay.
So now it's going to have to be sold on eBay.
I can't cancel out my auction, since there are bidders, without eBay charging me a penalty fee, because then they would consider it a sold item.

Look for it over their, under my ID of hemi71x also. Thank's a lot.
 
Status
Not open for further replies.
-

Back
Top