67-70 340 block

-
Status
Not open for further replies.
75slant6

75slant6

FABO Gold Member
FABO Gold Member
Joined
May 15, 2011
Messages
6,369
Reaction score
3,171
Location
Russellville, ky
Rating - 100%
14   0   0
Contact seller
Anybody in Ohio, Indiana or northern ky have a 340 block? I know a guy in Ohio who's lookin for a 340 block. He'll spend up to $400 or one.
 
I have 68 69 and 70. If I couldnt get $750 id let them stay where they are. I do have some 72-3 blocks for $500
 
wow that much! the last two i picked up in Chicago were $200. why does he need those years? the later 71-73 are just as good. I wouldn't spend $800 unless it was hot tanked and cracked checked at the very least.
 
The 69 I have for $750 has been tanked, checked, bored to 4.070, squared, line honed w/ ARP main studs, new cam bearings installed, new brass freeze plugs w a coat of orange on it, and then oiled and greased so internals wont rust. Had 2 done at the same time. One of them is soon to become a 416. In some cases you pay for what you get. Machine work is not cheap
 
swinger340 said:
The 69 I have for $750 has been tanked, checked, bored to 4.070, squared, line honed w/ ARP main studs, new cam bearings installed, new brass freeze plugs w a coat of orange on it, and then oiled and greased so internals wont rust. Had 2 done at the same time. One of them is soon to become a 416. In some cases you pay for what you get. Machine work is not cheap
Click to expand...

This is a good deal for what you are getting..........
 
I have a standard bore 69 block with main caps from a 70 model that I'll sell for $300; I'll put it on a pallet and ship from 67209 at your cost.

PM if interested-
 
Status
Not open for further replies.
-

Back
Top