front tires hitting
turn the the front cam bolt on the control arm all the way to the outside of the car and the rear cam bolt all the way to the center of the car. this will bring the upper ball joint back and bring the wheel farther back in the wheel well. you will need it aligned anyways. looks like a tall tire with the wrong size backspace on the wheel. if you can get it close and it just barely touches the lower front lip on turn in then you can trim the inside lip a bit. then if that still dont get you there then you can run a little longer lower fender brace and push the lower fender lip out just a pit. did this on my car. I pushed my lower fender corner out 1/2" and you cant even tell.
turn the the front cam bolt on the control arm all the way to the outside of the car and the rear cam bolt all the way to the center of the car. this will bring the upper ball joint back and bring the wheel farther back in the wheel well. you will need it aligned anyways. looks like a tall tire with the wrong size backspace on the wheel. if you can get it close and it just barely touches the lower front lip on turn in then you can trim the inside lip a bit. then if that still dont get you there then you can run a little longer lower fender brace and push the lower fender lip out just a pit. did this on my car. I pushed my lower fender corner out 1/2" and you cant even tell.
