8 3/4 install?

If the springs are already out I usually attach the front spring eyes, roll the rear end up over the rear of the springs and loosly attach it with the u-bolts and then lift the rear and hook up the rear shackles. Once the rear shackles ar bolted I snug up the u-bolts.

If the springs are already on the car just poke the rear end in from one side. I've got a little garden wagon that is just the right height so I can lift one brake assembly over a spring and sit it down. Then go lift the outer end up onto the wagon. I slide under the car and pull the assembly over the other spring. It workks really well and doesn't scratch a painted or powder coated axle assy.