Dodge Challenger Wheels

Cuda SRT8 said
Well, the SRT stuff is essentially AMG parts. Those may in fact be a different size than standard.

But the hubs are the same for all the cars! How can they be different if they all use the same hub?

Cuda SRT8 said
As for standard, I brought a PP wheel home and have a couple of spare tire/wheels and they don't fit the MustangII / Granada rotors (5x4.5) I used for mockup on my AlterKtion. I could dig all that stuff out again and double check, but as I remember, the wheels will go on and I did use the spares to roll my car around. However, I just snugged the lug nuts because the lug holes WILL NOT line up correctly.

I'd bet if you put a guage to the wheels you will find that your eye's deceived you.

Cuda SRT8 said
If you torque the lug nuts, you're going to stress the studs. For anyone not worried about a couple of mm or a few thousandths, go for it. But for me, things like brakes, wheels, tires and suspension are of utmost importance to safety. No way I would ever want to stress the studs like that on my new Baer components and risk an accident and someone's life. Some people go with "close enough". Everyone has a different viewpoint and priority on that kind of stuff I guess...

Just so we are clear, I am in no way saying "ignore a couple of mm". I am saying "THEY ARE THE SAME". Big difference there. I agree, if there were off a little I would be against running them, just like I don't like wheel adapters. But that isn't the case here, because they are the same.

Get a guage and try a wheel. Prove me wrong.