Painless Wiring Kits

I used the Ron Francis kit because it was a "Mopar" kit. Let me tell you the directions for wiring the ignition and the turn signal cam had Chevy and Ford represented but no Mopar reference! Not a big deal as I just called tech support. The tech support was actually very helpful.

The Ron Francis kit came with the Headlight switch. But, I had to supply the wiring for the Heater, Windshield Wiper, Dome Light and Reverse Lights. I think from what I have read the American Autowire may be a little more compreshensive.

I enjoyed wiring the car. I bought wratchet crimpers, good wire strippers, zip ties, wire loom (not the plastic stuff!) and good heat shrink. I also removed all of the plastic from the terminals. The reason I did this is becasue I hate how that plastic looks. With the plastic removed I could also see if I had a nice mechancial connection (yes sometimes I would redo the connection!). Then I used a small piece of heat shrink to cover the connection.

Once you get started it really isn't that bad. The RF directions were pretty good. It was 1 step at a time and don't move on until you've completed that step. I didn't turn the car over until step 3. I almost had a heart attack when it didn't turn over. Then I realized I forgot to push in the clutch! I guess I wired the clutch safety switch correctly! lol!

Good luck with whatever kit you choose!