Pics of my custom console re-do

Couple of new pics.

All the texture on the outside of console has been sanded out.

Couple coats of high build primer and to fill in the sanding scratches.

I worked for a few hours, using a little guide coat of filler along the inside edges. Then sanding and test fitting the top plate,,,, sand test fit top plate,,,, sand test fit.. you get the picture.
My goal was to get the gap at the edge of the top plate to be as minimal as possible. I've to it down to less that 1/32" all around. Think it looks pretty good.

Probably have more pics tomorrow after getting paint on the body of the console. Still have more work on the top plate before I paint it.