smallblock headers - which ones?

mopardrt said

I had summit headers on mine, hung way to low hit alot and I had to pound in the driver side to clear the steering linkage. Then I went with Headman block huggers and they are nearly impossible to get collectors bolted on the drivers side, this winter I have to figure something else out...

Click to expand...

Did you look here ? http://www.forabodiesonly.com/mopar/showthread.php?t=117019&page=4
Mine go under the steering , about 1/2 in lower than transmission pan , have not bottomed them out , at least no visible damage . Others further in the thread have them over the steering , so it can be done . I have 2 1/2 inch mandrel bend pipes , they flow really well . The shop that did them did it below the steering but the way they are curved up and inside then back makes them 1/2 inch lower that trans pan , not bad .
Look at all the pictures others have put up , you should be able to figure something out