1967 Barracuda Wiper wiring

your connector plugs in to that switch and leaves 1 connector un-used, (at least on my 2spd set-up) line up the pink wire with the "B" terminal, the v shaped connector with the red/green wires sits inside the V of the big connector.

the wires fit the switch as follows... look close on the back of thw switch its labeled.

Pink=B
Brown=A
Blue=P1
Green=P2
Red=H

BTW Passion for Mopars, I recently redid my wipers with a aftermarket switch and info from your website and posts saved my bacon!!!

Thanks,

JOE