383 in work...slowly, but in work

So after some him-hawing with my Dad about how to build this 383, I decided to go a different direction as mentioned in another thread regarding max wedge heads on a B block.

I decided to drop the engine in his '84 Ramcharger. The build will likely be the same as what was mentioned in the first couple posts;

Zero decked KB 162 flat tops
Crane hyd roller I sourced off here (284/292--222/230@050--509/528--112LSA)
915 heads with new valves, springs, etc, competition valve job and maybe some light bowl and port work
RPM intake
750 or smaller vacuum secondary carb, depends on what the engine likes
1 3/4" long tubes 2.5" duals
2500 stall
9 1/4" rear with 3.55 or 3.92 gears-haven't decided yet...

I figure it'll be fun to drive around :) ...even if it is a gas hog