416 Dyno Results

The LD340, Air Gap and RPM are very close performance wise. If you add a lifter valley pan under the LD340 or RPM, the performance difference is usually under 5 hp on sb mopar stroker engines that I have seen dyno results for. I run 93 octane pump gas. My quench is good: .037. Ross dish pistons as well.

I have 9.9:1 measured compression with cc'd checked Edelbrock RPM heads. And I have around .035 quench. But I have a smaller cam XS274H-110 236/242@50 solid.

On California pump 91 gas, I have to run 32 degrees total timing on the street or it will ping.