Newbie here, just need some help on my 1965 Dart, (super six) - the front bushings are shot on the strut rods, I just assumed that they could be removed by removing the large nut and washer on the forward end of the rods. However, once I removed the right side nut and washer, it does not seem possible to completely remove the old bushing. Half still stuck in there. The shop manual is unclear, as to procedure, but seems to indicate the whole strut rod has to be removed. And doing that requires removal of the lower control arm? Seems like lot of work to replace those front rubber bushings. Help me out here, what's the best way?