Cinnamon 75 Duster \
Started getting some things back together. Cut insulation for firewall from roll (from DMT) I decided I did not want the shiney stuff visible, so found that dark gray primer adhered pretty good and looked similar to the rubberized stuff from factory. Under dash is same insulation with shiny side up - attached with weatherstrip adhesive. Put the wiper motor and pivots in and attached the linkage. Installed the heater and AC boxes.
Also starting to populate the engine bay. Got a good blower and gas pedal assembly from FABO members. A little cleaning and painting and they are in. Cleaned up and re-taped some areas of the harness. battery tray and horns plus a bunch of other stuff. Will be getting some new wiring clips and working on routing as it comes together.
Started getting some things back together. Cut insulation for firewall from roll (from DMT) I decided I did not want the shiney stuff visible, so found that dark gray primer adhered pretty good and looked similar to the rubberized stuff from factory. Under dash is same insulation with shiny side up - attached with weatherstrip adhesive. Put the wiper motor and pivots in and attached the linkage. Installed the heater and AC boxes.
Also starting to populate the engine bay. Got a good blower and gas pedal assembly from FABO members. A little cleaning and painting and they are in. Cleaned up and re-taped some areas of the harness. battery tray and horns plus a bunch of other stuff. Will be getting some new wiring clips and working on routing as it comes together.
