7 1/4 plug
- Thread starter dart67
- Start date
-
bcschief
Well-Known Member
Ratchet or breaker bar not sure if it's 3/8 or 1/2 inch plug has a 8 point opening so a square drive will fit it.
Brian
Brian
I can't remember ether, but I used a 1/2 or 3/8 extension on a ratchet on
my 7 1/4 rear drain plug, I will do a check on my level before I hit
an eighth mile track tomorrow :burnout:, should be good but on my to do list
this evening :glasses7:
my 7 1/4 rear drain plug, I will do a check on my level before I hit
an eighth mile track tomorrow :burnout:, should be good but on my to do list
this evening :glasses7:
roadrunnerh
Well-Known Member
I used a 1/2" drive
I bet i did to roadrunner, thank you, now I know what to grab before I crawl
under her
Oklacarcollecto
Life is an experiment
The square end of a 1/2" drive breaker bar or ratchet.
-
