Swinger 1969

Finally i'll reach the last "cleaning" area, the front end. By cleaning I mean that if there is old metal sheet that has rust or old painting etc, I will clean it with metal brushes (with power drill) to the bare metal. (And I'll paint it to protect it from rusting again)
I started from outside of the car, roof, window openings. Then I went inside the car to the driver and passenger area, floor, roof and walls. Last half of year I have been under the car cleaning the floor from down under.
Yes it would be easy if that sheet metal would be straight all the way.
But all that straight metal sheet is new, AMD quarter panels, passenger floor, rear floor etc.
What was left, had full of corners and small pocket areas. It takes time...
The front suspension has been removed so that it is somehow easier to reach all places in the front end.
So, here is some pictures:
Passenger side is cleaned, drivers side still waiting its turn. On the last pictures you will see some blackish or bluish coating, it is rust converter in case there was left some rust spots somewhere.
You can also see new welded half front frame rails on both sides of car.