'65 dart pedals

Well, I decided to just go ahead and take it apart and see how the plastic bushings were The .500" shaft on the clutch pedal was corroded a bit, so I took some 600 grit sandpaper and it cleaned it right up. But the .500/.560 plastic bushings are worn pretty bad, but brewers has them. does anyone know if the brake pedal is on another shaft on these? There's a bolt holding what looks like another bigger shaft that the brake pedal rides on and the clutch pedal goes in.
By the way, putting nickels between the coils on the clutch pedal spring works very well to get it off