Is it possible Not to use the push button

memike said

The shifter/push button don't make it launch hard, the trans and T.C does, I just don't want to retrofit one in my 66 Valiant Sedan, I have a pm out to Carrlie_S for an adapter
so I can put a floor shifter in. So I will need a 67 up automatic, there is 66 models out there
but there is more 67 to 87 I believe, or when ever they stopped making the /6 in America
I need something I can use without doing a retro fit, and just instal a good floor shifter in my 66 sedan build.. I don't have a place for it, but I do have a place for a floor shifter.
Thank you for you replies and input on this :glasses7:

Click to expand...

Keeping the engine you have now... There is not going to be an adapter that will make a big hub fit in to the small crankshaft hole because the hole isn't going to be larger with any adapter since that cast iron won't stretch. The only easy way around this is a special made torque convertor but even then it will matter if your new transmission is a lock up or not. Fishy68 is working on this for another member right now.

Another option is you could always have the crankshaft hole redrilled to accept the bigger hub.

Does Victoria have bucket seats? If so you could go with the floor shifter that the 1966 Barracuda used.