what cam would you put in this 360

Rick, I swapped the Thunder series carb on his car with the 750 Eddy on my car. it seems to work out better for the both of us. And WRB, I know he does not believe me. I have made the mistake too many times of telling him stories in the past of the way it was back in the day of how I beat the pants off of a guy who had a 69 Nova with a 396 in it and got so pissed when I took him in my 69 Swinger 340. so no, he doesn't believe me for a second, but I tried to convince him. Swinger........static compression and gears, have no idea. It is a pretty much stock engine and I believe it has a towing cam in it. This engine came out of a 78 or 79 RV. I bought this engine to just throw in the car so he could drive it until he put the 340 together down the road. when I got it, found out that #7 piston had some water in it so I pulled the engine down and put rods and mains in it and honed the cylinders real good and stuck a set of rings on it. I verified the engine to have 43,000 miles on it and there was no ring wear on the cylinders at all. it turned out nice and it is strong and has no smoke or anything. I have almost convinced him to not even put the cam in it. I told him if he had the x heads done and with a good intake and carb on it he will probably have all he NEEDS right now and put the money where it is better used. In the 4 speed and paint. I pulled the 8.75 rearend out of a 66 Coronet a couple years ago and have not been back in it other to check it out when we swapped it. What ever the Coronets came with is what rear is has. I think it was a big block Coronet. We just put this car on the road this spring. I have a lot of things to do with it yet.