what are your guys thoughts on this custom stripe i'm planning on painting for the hood? I'm making the car one of a kind. already removed SE emblems, and the signal markers on top of the fenders. this is a real rough image that I made with the build in 'paint' program on my computer. I want to come in about 4 inches(roughly) from the edge of the hood, then make a 1/4" pin stripe. after the pin stripe, approx 7/16" of bodycolor (plum crazy) and then a wide flat black stripe that goes the whole width of the hood(minus about 4 inches on each side). Then within the black stripe I will have a body color mopar 'M' and the word 'MOPAR' underneath that. just like the official logo. the approx. dimensions of that will be like 16"x16". Just to make sure that it isn't too close to the centerline of the hood. The white line painted down the centerline of the hood on my image is just to signify that that is where my hood comes to a point in the middle. The painted on decal will be at like a 45 degree angle (similar to the nice big 340 callouts on our mopars). what do you guys think??
