65 Barracuda Gasser + 1956 325 Dodge Hemi Build

As the pictures will attest we spent a few more hours thrashing. After putting about 20 good minutes of run time on the little hemi it was time to change the oil, run the valve lash and cut the break in filter open to have a look. The inerds of the filter were spotless and the valve adjustment resulted in no more than .002 on a couple of settings........so sweet.
We still have a lean condition on the center carb and now that pretty much everything else is done, we'll address that next. And yes we had to undo the master cylinder to get the valve cover off! Hopefully a mopar unit will solve that problem.
Some pics from today........