Coil Negative getting power and not starting - Slant six

I tried looking at everything again just to make sure i didn't make a mistake. Everything checks out except one thing ... The ECU orange box's wire harness wasn't fully plugged in. I also removed both the V.R. and the ECU and sanded the back to make better ground.


After that I tested the coil and now negative has no power, brown wire is lightly dimmed when key is in the ON position (engine off) and Blue wire is bright. car starts now and everything is warming up nicely. now I need to test the voltage levels and plug my voltage gauge to see if everything is truly alright. waiting for my new multimeter to get here.


simple mistake on my part, Thanks both you guys



The only problem i have is the oil gauge level being low but thats a different subject