65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana

Once again, it's been a long time since I posted anything or had time or motivation to work on the Barracuda. However, after working on vehicles the last 3 days, I finally decided to get under the Barracuda tonight and drill out the last few spot welds I could see on the rear shock crossmember. I can't find any of the spot welds on the forward lip, so tomorrow or Thursday I'll get underneath it with my grinder and a cut-off wheel and cut the front lip out of it. I'll post some updated pics once I get the coil over shock crossmember installed.

While I was at Carlisle, I snagged an E-body pistol grip for the T-56 and my best friend hooked me up with the ProParts headers I mentioned previously. However, they were better than I thought; they weren't wore out at all, just modified and a few pipes cut. I also picked up a set of spot weld bits that I used to drill out the last few spot welds on the rear shock crossmember this evening.