alignment wrong?

What is all this nonsense????

Here are the specs according the printout:
Front Left.................... Front Right
Actual Before............. .. Actual Before
0.4..... 3.0...... Camber.... 0.1..... 1.8
0.1.... 2.8........ caster..... 1.1...... 2.3
0.13... 2.47....... toe....... 0.12.... 2.44
7.1..... 7.9 ........ sai........ 7.0..... 5.8
7.5.... 10.9. included angle. 7.1... 7.6

Are you saying that camber is NOW .4 and .1 degree? positive? negative? Do you know?

You running bias or radials? Radials should be NEGative camber not positive

Caster is .1?? on one side and 1.1 on the other? You should have a LOT more caster for radials, min. of 1.5 or more if you can stand the steering effort, power steering can use more

Toe? is what? .13? Is that inches, degrees or what? If it's inches is that per side, are we supposed to add it and get .26?

A starting figure IN INCHES for toe is 1/8" or .125 TOTAL, not per wheel