No top end power, need help

EmersonC said:

I did switch the wires and the engine would not start. I was not messing with the timing as I was cranking it. No one here today to help.

The timing is currently set to around 15*

Click to expand...

I may be mistaken, did not realize yours has the internal module

You still using the Mallory module, or have you wired the MSD directly to the pickup coil?

Review the MSD destructions.

You might want to contact Mallory/ MSD. Without one in front of me, I'm not familiar with how you'd change them otherwise

Just like this

At this point I don't know------but from your description and the looks of that cap it appears you have a problem.