Aluminum Fuel Tank Project / EFI Fuel Cooling
Here are a few photos of how I have the AN-8 Fuel Supply line ,AN-6 Fuel Return Line and Power Wire ran through the center of the front and rear frame rails.
This is where the lines exit the rear of the front frame rail.
This is where the lines go into the front of the rear frame rail.
This is where a gusset was removed to get through the rear frame rail.
It is under the axle bump stop.
This is not the final exit location of the lines.
Once I get the tank mounted, I will drill holes in the side of the frame rail for the supply and return lines.
The line with the fitting is the supply line at the old pump location.
Herb
Here are a few photos of how I have the AN-8 Fuel Supply line ,AN-6 Fuel Return Line and Power Wire ran through the center of the front and rear frame rails.
This is where the lines exit the rear of the front frame rail.
This is where the lines go into the front of the rear frame rail.
This is where a gusset was removed to get through the rear frame rail.
It is under the axle bump stop.
This is not the final exit location of the lines.
Once I get the tank mounted, I will drill holes in the side of the frame rail for the supply and return lines.
The line with the fitting is the supply line at the old pump location.
Herb
