Best place to buy front suspension bushing rebuild kit

I got a Poly kit for my '75 from PS Components recently. Included everything but the pitman. Don't recall the price, but was less than PST at the time. All the bushings were Energy Suspension and the hard parts were McQuay-Norris. The M-N stuff had no 'Made in" on the box, but found USA on some of the castings. I ended up getting a set of regular bushings at AutoZone for the lowers, after sliding the poly in the LCA's I could see why many people say they don't hold position. I did see recently on here that PST is throwing in the standard lowers with their poly kit.
Another thing to consider is if you want the offset uppers which are not available in poly.. Havent got it together yet, but I talked to the garage that will be doing my allignment and they felt with everything else replaced I should not need them. He also felt that big blocks tend to have more frame distortion and more likely to need the offsets than my 6 cyl.

CAMOPARS said

I haven't gone through a front suspension in several years but back then, I would only suggest PSC (Performance Suspensin Cmponents) in AZ. They were the only ones using all American made parts (Moog, TRW, etc.). The others (PST, etc.) were pulling from bins that had a mixture of domestic and foreign parts. When it comes to bushings and other suspension components, US-made is still number one. Good luck.

Click to expand...