Solid Roller Cam in a LA 360 and Edelbrock RPM Heads

Skrews a d Rusty make good valid points to put on the scale and weigh out. IMO, you could save a lot of money with a standard solid cam and use 1.6 rockers for an effective and slightly radical set up with those heads. (Edelbrock heads)

Factor in the valve lash a d double check the coil bind on the heads. The right set up can produce mid 11 et's without really hitting the hammer hard on the build. If you start in with head porting on the Edelbrock's for more lift as well, you can run another second off the ET easy if your willing to do the work and search for it.