Eddies Vs 915 J's

MRL Performance said

How much power are you looking at gaining? If you want to good kick in the butt, I would just swap the cam out for something better, Solid flat tappet will do wonders! Something in the high 230's intake, low-mid 240's exhaust and .500-.525 net lift will work very well.

Click to expand...

Cheers Mike, I've been looking at the COMP cams FL solids actually.

I was considering 239/243 cut on a LSA of 110 or 112 if I can get away with it and a couple of degrees installed advance.

Lift at the lobe would be .350"/.361"

With this cam, I'd use 1.6 rockers and the Edelbrock heads would be ported to max effort, so around 290CFM at .550"

I don't know what sort of power is possible but ideally I'd like about 430-450hp with an RPM limiter set at 7000 tops. or maybe I'm dreaming?