does anybody know iof there needs to be a sequence to removing the rocker arm shaft. I need to replace push rods. As i understand the toque soecs are 17 ft lbs but I just want to make sure there is no specifice sequence to removal and retightening
My factory service manual (1964) says 30 foot pounds. Not 17. Is that wrong? I JUST torqued them down to that figure and had no issues. I started in the middle and worked toward the end, alternating, side-to-side. I brought them down in 5 foot pound increments. This is a solid lifter setup, if that matters.
I don't think it matters what sequence you use when dis-assembling the shaft from the head.