Leaking Driveshaft...HELP!!!

Tranny seal looks dry and so does the front part of the yoke but the u joint is wet. We have ran in to this on other cars before so it might be a possibility here. Sometimes there is a weep hole in the back of the yoke so air can escape as the yoke is installed on the splines. This may not be accurate on a Mopar as it has been quite a few years. The fix is to remove the driveshaft, put bearing grease in the bottom of the yoke and reinstall the driveshaft. I would go ahead and install a new seal plus check the yoke for grooves while I was there.

http://www.forbbodiesonly.com/moparforum/showthread.php?51361-65-drive-shaft&