Project Frog Princess
Abodybomber, could swore I saw a post from you about making the 5.9 roller lifters solid using washers but can't find it. If so, mind commenting on the thread I put up?
http://www.forabodiesonly.com/mopar/showthread.php?t=248518
I want to accurately check the valve clearance. Brian from IMM is saying I may need to adjust the cam timing to avoid clearance issues.
Edit: found it
http://www.forabodiesonly.com/mopar/showthread.php?t=233544&highlight=magnum+lifter
Print